MDT XRS Chassis LA

[packratt]

Considering buying this chassis for my 111 in 300 win mag. This chassis uses the AICS 3.850" CIP magazines.

When did Savage start using this cutout length? My rifle is 8-12 years old with detachable mag. I'd have to dig out receipt to get more accurate on age.

[Dave Hoback]

Hmm… as far as I knew, only the Savage 110 in 338 Lapua has that inlet.

[packratt]

I know the standard long action and the one used with the .338 are different above the stock.

Is the bottom half of the receiver the same with a different magwell?

[Dave Hoback]

Not sure what you mean by “above the stock” The 110BA is a standard Large Shank. They do have larger mag boxes, of course.

I’m not certain about the Small Shank LA’s. Question.. why don’t you simply measure yours? You said you have a 111 in 300 WM, right?

[Blue Avenger]

I think the answer your looking for is the the stock itself is what accepts and mates the ACIS mag's to the 110 savage.

[packratt]

I’m not certain about the Small Shank LA’s. Question.. why don’t you simply measure yours? You said you have a 111 in 300 WM, right?

In trying to find info on if this would fit, there was an article mentioning the 338 receiver has a solid top and the 111 doesn't.

[Dave Hoback]

Oh, I get what what you mean. Yes, the 110BA is a port action, or I’ve heard them called hooded Action. But yeah, I get it… the “top”, lol! Sorry, my bad. It’s just looks. The Action itself is the same 5.062” screw length Long Action. But it’s a Large Shank, vs your Small Shank. Or maybe your’s is Large Shank as well?

Your Action will fit the Chassis. Yes! Same screw length. But I haven’t measured the Action mag well at the bottom. That’s why I was saying you should measure yours. Maybe Jim or Fred might know off the top of their heads.