I've been lurking around for a while and would like to say "Hi" and thanks for such a valuable resource. I have a 110 accutriger in 7mag that I purchased with the intention of going to a 7wsm so that I can load vld's to the lands and still feed from the mag. My intentions are to use an aftermarket stock from XLR Industries with the detachable AI mag. First question is which mag do I need to go with for the 7wsm. The second question is will I still be able to use factory ammo with a shorter OAL. I put a 7wsm cartridge in my rifle to see if the 7mag feed lips would accept it and they would. However when I slowly cycled the bolt, once the cartridge cleared the feed lips, it popped out of the gun. If I had a 7wsm barrel and could cycle the bolt a little faster this may not happen but I'm not sure. I don't want to build a rifle that is specific to just the longer bullets. Any advice would be greatly appreciated.