I finally got my modified case so I could start testing loads for my Axis II Precision in 6.5 Creedmoor, and don't much like the results. I sent Hornady a fired, un-sized case which measured 1.531" long, case head to shoulder, using a .400" insert. I wanted to use Hornady 140 gr. ELD Match bullets, but the measurement from case head to the lands with that bullet is 2.264. Using that measurement as a starting point would make that bullet over 2.920" long, which won't fit in my magazine by a wide margin. I have 100 unfired Lapua cases I've been working my way through using 2.820 as the cartridge overall length so I can use them in the magazine. Is is it normal for Savage rifles to have such a generously sized chamber?