Results 1 to 5 of 5

Thread: Stevens Visible Loader

  1. #1
    New Member
    Join Date
    May 2022
    Posts
    3

    Stevens Visible Loader


    My elder brother recently passed away and I inherited a
    Stevens Visible Loader that is incomplete. I have a few
    questions that might help me decide what to do with it.

    First, the serial number is "F 5XX" the XX are two number.
    Can anyone give me an idea of the date when this might
    have been built?

    Second, the front half of the rifle is there: barrel, ammo tube,
    sights, bolt, firing pin, trigger, pump wood. The missing
    parts are the back stock, the hammer, hammer spring
    and what ever else goes above the trigger. It appears
    that s lifter is missing too because when the actions is
    worked a shell is not lifted into alignment with the bore.
    So this leads to a number of questions.
    A. is there something that tells how to take the action
    apart and reassemble it? Words and a schematic
    that shows the parts and where they go would be good.
    B. Is it possible to find/buy the missing parts after I
    find out what is missing?
    C. Is it worthwhile to try to make this a functional
    firearm or is it only extra parts.

    Would a picture help anyone?

    Thanks,

    Thomas

  2. #2
    Basic Member
    Join Date
    Aug 2019
    Location
    Connecticut
    Posts
    41
    I suggest you try to find another rifle for the missing parts.

    Also, note these are EXTREMELY weak actions . . . .NOT to be used with “high speed” ammo . . . .

  3. #3
    Basic Member
    Join Date
    Oct 2015
    Posts
    571
    There's some parts on e bay. stevens 70 visible loader: Search Result | eBay

    I have one and it's a fun shooter! I love restoring an old closet queen back to functionality!!

  4. #4
    New Member
    Join Date
    May 2022
    Posts
    3
    Good Morning,

    I really appreciate you thoughts on using standard velocity ammo and that these are fun shooters
    when restored.
    However, what I really need is some technical information. If possible, I would like to know when
    this was built. But more important, I need a schematic or better yet and explanation of how to
    take the action apart and what goes into it (so that I figure out what I need to make it functional).
    It would also be nice to hear from someone who have parts or a parts rifle. Perhaps one of
    us can end up with a functioning rifle. :-)

  5. #5
    Basic Member
    Join Date
    Jul 2017
    Location
    Sedona
    Age
    64
    Posts
    219

Similar Threads

  1. Rimfire: M70 “visible loader” . . . .
    By JimFsh in forum Vintage Savage/Stevens/Fox Firearms
    Replies: 0
    Last Post: 09-14-2019, 02:01 PM
  2. Muzzle loader conversion
    By quinton in forum 110-Series Rifles
    Replies: 13
    Last Post: 07-14-2016, 09:58 PM
  3. Lee Loader experience
    By Odindad in forum Ammunition & Reloading
    Replies: 4
    Last Post: 12-16-2013, 12:08 PM
  4. Rimfire: Stevens model 76 auto loader .22 LR rifle
    By blazinsun69 in forum Vintage Savage/Stevens/Fox Firearms
    Replies: 5
    Last Post: 03-01-2013, 11:15 PM
  5. Two piece bases without visible screws?
    By showgun in forum Optics
    Replies: 4
    Last Post: 11-16-2010, 08:49 PM

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •