Went out to shop and decided to change barrel on one of my rifles. Wanted to put on 30-06 but didn’t want to take the 25-06 barrel off the 111 as it is shooting well tight now. So I took the 22-250 Axis and used it, took about an hour to take scope off, swap barrels and put scope back on. Left is torquing everything, bore sighting and shooting. Hit head spacing on first try and checked 3 or 4 times to be sure something didn’t move as I tightened everything down. Also changed stocks as I have a heavy barrel stock that I have added weight in for the long action barrels so whole setup will weigh about 9 pounds. Not recoil sensitive but don’t have to walk very far to stand and a little extra weight makes easier shooting on old shoulders.


Sent from my iPhone using Tapatalk