30-06 to 300rum

[jraney]

Hey folks I’ve been looking around and I can’t find the answers I need. I have a model 110 chambered in 30-06. Can I debarred this for a 300rum and what all is needed? I know a new barrel but what about the bolt face?

Thanks

[SageRat Shooter]

You will need the Magnum bolt face (.540). And you'll want to make sure what shank size you have on the 30-06 in comparison to what shank size the 300 RUM is, or if you can get it in different shank sizes. 30-06 is usually a small shank and the magnums usually use a large shank.

Just something you'll want to make sure of... Also, if DIY you'll need the wrenches to take the barrel off, and I recommend the go/no go gauges too.

[Dave Hoback]

Hmm... what’s with the rash of RUM threads recently?

Doesn't matter if it’s Small or Large Shank, but as SageRat pointed to, make sure you know what your Action is & order the correct barrel. Barrel, magnum bolt face & you'll need to modify or replace the Magazine Box for longer OAL.

Oh! And a mouth guard! For when that RUM rattles your teeth every shot!

[yobuck]

Well again, not being a Savagesmith i could be wrong, but why cant you just change the bolt face and use your (ahem) lathe to rechamber the 06 barrel?

[Dave Hoback]

He could have that done. Personally, I would never rechamber a stock Savage barrel. I like premium barrels. Bartlein, Shilen, Brux, etc. Especially especially since it’s likely a thin 22” sporter barrel.

[jraney]

Hey thanks for the info. After a little more research I think I will just buy a new rifle in 300wm. The price of 300rum ammo is way too much for me and from what I saw the WM is less expensive and still has great ballistics. I’ll keep the 06 for just another rifle to have fun with.