Results 1 to 4 of 4

Thread: Savage AXIS XP .350 factory scope height

  1. #1
    New Member
    Join Date
    Oct 2021
    Posts
    2

    Savage AXIS XP .350 factory scope height


    Hi Group-

    New to the forum (but not new to Savage). I just picked up a last minute addition for a coming deer hunt. It is a Savage AXIS XP in .350. It comes with the factory Weaver scope on it (I will probably upgrade that soon, but not before deer season).

    At any rate, I'd like to figure some ballistics and need the scope height. I figured I'd ask here to see if anybody knew what that was before I try to figure it out myself.

    Thank you!

  2. #2
    Basic Member
    Join Date
    Nov 2016
    Posts
    1,048
    First off, make sure you take everything apart and properly torque all the scope mounting hardware. They are notorious for coming from the factory loose. You can easily figure out the scope height yourself. Just measure from the center of the scope bore to the center of the barrel bore. Likely to be somewhere around 1.5-2.5"

    https://www.accurateshooter.com/opti...ht-above-bore/

  3. #3
    New Member
    Join Date
    Oct 2021
    Posts
    2
    Thanks for the tips about torquing the hardware. Do you now what the specs should be? Yes, I understand that I can measure it, but I'm not near my gun and it dawned on me that somebody on the forum might know since it seems like these pre-set up guns are reasonably hot sellers.

  4. #4
    Basic Member
    Join Date
    Nov 2016
    Posts
    1,048
    I would go 20-25 in/lb on the bases and scope mounts and 15 in/lb on the scope rings themselves. Make sure you are getting good engagement on the base screws. Often times there is debris in the hole over the barrel that cam limit the depth.

Similar Threads

  1. savage 10 fcp-sr Scope ring height
    By pah696969 in forum 110-Series Rifles
    Replies: 4
    Last Post: 06-28-2017, 08:51 PM
  2. Scope Ring Height for Savage Stealth
    By Maximvickers in forum 110-Series Rifles
    Replies: 3
    Last Post: 04-22-2017, 10:57 PM
  3. Mark I/II/93R: FV SR factory scope base height?
    By gruvmann in forum Savage & Stevens Rimfire Rifles
    Replies: 3
    Last Post: 03-17-2015, 12:32 PM
  4. Axis Factory Scope Mount
    By seanmurphy265 in forum Axis Series Rifles
    Replies: 18
    Last Post: 01-06-2013, 03:55 AM
  5. Savage 16 scope ring height
    By boggintuff in forum Optics
    Replies: 0
    Last Post: 01-02-2013, 07:45 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •