Hello all, wanted to post an issue I had so it doesnt happen to anyone else. My axis had an unreasonably heavy bolt lift so I bought a kit. When I attempted to loosen the BAS I found it to be so tight I thought it may break the arm so I secured it by the bottom lug. When I finally broke the bolt loose I discovered I had bent the bolt body of my brand new never shot rifle. A better way would have been with an impact driver while holding the bolt by hand. Second best may be a dead blow hammer while holding by hand again so as not to tweak the bolt body. (Any leads on a body appreciated).
Anyway I hope this post keeps it from happening to anyone else.