Welcome from colorful Colorado
Sent from my SM-G991U using Tapatalk
Rust here. I found this forum when I was searching for Savage Axis bolt components. I was missing a spacer between those firing pin springs which results in misfires. If anybody know a place to get it or the dimensions/specs so I can have it fab at a shop. There are not that many gunsmiths where I am so ordering a new bolt assembly would be an issue, I wouldn't know what to do with the headspacing, etc.
Thanks guys.
Welcome from colorful Colorado
Sent from my SM-G991U using Tapatalk
Welcome aboard
Welcome. I’m not sure on the spacer, but I’ll try to find out for you. Are you able to machine it? If not, & we can find the specs on it, I’d be happy to machine one & send it to you. No charge.
Oh wait.. DUH! Do you have a Vernier Caliper, or Micrometer? If you can measure the diameter of the portion of the firing pin the springs/spacer go over & the diameter of the recoil springs, that’s all I would need.
Or you can grab one of these from Desh. https://deshind.com/2020/03/24/new-bolt-lift-kit/
welcome aboard
Bookmarks