After reading this topic (http://savageshooters.com/SavageForu...c,36216.0.html) I got to thinking and monkeying around. I found that a 9/64 Allen wrench wedged perfectly in the trigger spring hole with no modifications or glue/epoxy at all .Not all 9/64 wrenches are created equal. Only the one I had made by Husky worked...not sure why. I cut a piece long enough to have about 1/4 inch sticking out the top. I got a $0.46 spring at True Value, and what a difference!! No creep and a much improved trigger pull. I can't wait to get out and give it a try with the lighter trigger!!
Bookmarks