Results 1 to 1 of 1

Thread: Bubba Fix for Unregulated Barrels

  1. #1
    Basic Member
    Join Date
    Jul 2017
    Location
    Sedona
    Age
    63
    Posts
    219

    Bubba Fix for Unregulated Barrels


    The barrels on my 22LR/410 Model 24 are woefully unregulated. When the 22 is sighted in, the 410 POI is 8 inches down and 4 inches right.

    I had a surplus Burris Fastfire III sitting around, so I mounted that to the sides of the barrels. The Picatinny clamp has been cut from the base, and the base epoxied to fit the barrel channel. The base is taped to the barrels with filament tape and the red dot is screwed to the base.

    Zeroing was quite fiddly, given the skeewhiffle orientation. But now I can put slugs into a one inch bullseye from 25 yards. I just give ‘er a little tacti-cool twist and line up the dot instead of the irons. Neither interferes with the other.

    https://drive.google.com/file/d/1_AK...w?usp=drivesdk

    https://drive.google.com/file/d/1jb9...w?usp=drivesdk

    https://drive.google.com/file/d/1RrU...w?usp=drivesdk

    https://drive.google.com/file/d/1uFZ...w?usp=drivesdk
    Last edited by Model24; 09-15-2021 at 07:35 PM. Reason: Add photo

Similar Threads

  1. Replies: 10
    Last Post: 05-16-2016, 10:45 AM
  2. Bubba needs assistance ... blind mag question
    By dnsmith in forum 110-Series Rifles
    Replies: 4
    Last Post: 10-22-2013, 12:27 PM
  3. Seen the RemAge barrels, how about BrownAge barrels
    By kelbro in forum 110-Series Rifles
    Replies: 3
    Last Post: 06-02-2013, 01:06 PM
  4. Did I just Bubba my rifle up?
    By mugsie in forum 110-Series Rifles
    Replies: 2
    Last Post: 09-28-2011, 09:07 PM
  5. Replies: 4
    Last Post: 01-30-2010, 06:09 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •