Savage Browning patent semi auto jammed

[99 K 30-30]

It's stuck. Any suggestions on how to get it apart ?

[Robinhood]

You are way to smart to drop a question with no information. call a mechanic and say my car is broke then hang up. See how long you will wait for him to not only find the car but diagnose it without the keys or any other info. LOL

Bolt opens.............................. Case is stuck in the chamber........................................... .................................................. ..........................

[99 K 30-30]

Oh boy look at my post count, not that I provide any useful info !

[Stumpkiller]

I'm waiting for an image. I didn't know Savage and Browning ever corroborated on a pistol(?) except for the wartime 1911's made by Savage. And no one calls a 1911 anything but "1911".

[99 K 30-30]

Browning patent semi auto long recoil 12 ga shotgun.

[Robinhood]

Oh boy look at my post count, not that I provide any useful info !

You changed your original post i see. So you want to take the Browning patent shotgun apart now? That's easy.

[olddav]

Try looking for instructions on how to disassemble a Browning A5 shotgun. If it is indeed an A5.

[PhilC]

Try looking for instructions on how to disassemble a Browning A5 shotgun. If it is indeed an A5.

Or Remington Model 11, again if reference to an A5 applies.

[99 K 30-30]

Sorry I was unaware of any othe Browning patent guns made by Savage.
Taking it apart is easy, fixing the issue requires someone with ability beyond dissiings other posts and stating the obvious.
I.E. somebody who actually has worked on one of these.

[Robinhood]

Sorry I was unaware of any othe Browning patent guns made by Savage.
Taking it apart is easy, fixing the issue requires someone with ability beyond dissiings other posts and stating the obvious.
I.E. somebody who actually has worked on one of these.

Sorry brother, You pounded your chest so much and beat up on a valued member(yobuck) on every post he made for what...a week, I thought you had some troubleshooting skills. I apologize for giving you that credit. No one is a mind reader. But if you look closely you do have one fanboy already.

I am guessing you finally pulled the magazine end cap off, pulled the forearm and barrel. But what we don't know is if it was high or low brass. Factory or hand loads. Chamber condition? Extractor moves freely or no? If the case is even able to be removed? Does the bolt move freely? Just what is it you you need help with. Otherwise it is spray it with some Kroil and wait.

[99 K 30-30]

If stating facts is "beating up", you need to join the SJW CRT groups.

[Robinhood]

Sorry, I can't help. good luck

[olddav]

I’m out