Linear Compensator

[jkv45]

Has anyone tried a linear compensator?

I'm considering one for a .308 project I'm working on.

The main reasons being directing the blast/sound downrange and less dirt being blown around when shooting prone.

Thanks.

[nathantc]

yes, yes i have, and i absolutely love it. very very small difference in felt recoil on my AK47. That said when popping a hog at night the difference in blast and sound behind the buttstock is amazing. Without it my ears would ring something fierce, with it, no ringing ears. I know someone is going to give me hell about not using hearing protection when hunting, but if you ever have stalked hogs in 100* southeast texas weather, you would understand the need to hear your pray and not fill your ears with sweat.
cheap ebay one used here https://www.ebay.com/itm/264666105734

[jkv45]

Thanks Nathan.

I can understand how it would be beneficial for you.

I might give it a try, but I can't find a lot of info about them on larger caliber rifles. Most popular on short barreled ARs from what I've seen.

[nathantc]

Thanks Nathan.

I can understand how it would be beneficial for you.

I might give it a try, but I can't find a lot of info about them on larger caliber rifles. Most popular on short barreled ARs from what I've seen.

it will redirect the sound away from the shooter for sure. They are popular on SBR ar15s as they create back pressure in the barrel which can help with cycling. Much like a suppressor does. There is a noticeable difference in my AK's gas system with this attached. It throws the empty "steel" about 20' away with it attached, maybe half that without. I use a buffer due to this.
In a bolt action rifle there is no concern for that issue at all. It will do what you are wanting it to do. If you are still unsure, buy a cheap one like i did, BE SURE ITS STEEL, and give it a go. Then maybe invest in a quality one. That was my plan, but i like the cheap one well enough to just keep it.

[jkv45]

it will redirect the sound away from the shooter for sure. They are popular on SBR ar15s as they create back pressure in the barrel which can help with cycling. Much like a suppressor does. There is a noticeable difference in my AK's gas system with this attached. It throws the empty "steel" about 20' away with it attached, maybe half that without. I use a buffer due to this.
In a bolt action rifle there is no concern for that issue at all. It will do what you are wanting it to do. If you are still unsure, buy a cheap one like i did, BE SURE ITS STEEL, and give it a go. Then maybe invest in a quality one. That was my plan, but i like the cheap one well enough to just keep it.

I've asked the manufacture/seller about this, and they said it didn't increase backpressure. Sure sounds like it does.

The rifle I'm putting it on doesn't respond well to additional backpressure, and doesn't run well suppressed. It doesn't have any way to adjust the recoil impulse, as it's roller-delayed blowback and not gas or impingement operated.

A linear compensator may cause problems with the operating system.

Thanks.

EDIT: The one I was considering was expensive and 2-piece with baffling. I have seen other, much less expensive ones, that are basically just an open tube - no holes or internal baffling. I wonder if that would get similar results without adding backpressure.

[nathantc]

I've asked the manufacture/seller about this, and they said it didn't increase backpressure. Sure sounds like it does.

The rifle I'm putting it on doesn't respond well to additional backpressure, and doesn't run well suppressed. It doesn't have any way to adjust the recoil impulse, as it's roller-delayed blowback and not gas or impingement operated.

A linear compensator may cause problems with the operating system.

Thanks.

EDIT: The one I was considering was expensive and 2-piece with baffling. I have seen other, much less expensive ones, that are basically just an open tube - no holes or internal baffling. I wonder if that would get similar results without adding backpressure.

On a 6.5cm rifle i recently sold i had a muzzle break that had a shroud over it. Granted it was a bolt action rifle so i have no way of knowing if it has back pressure issue. That said it was great for prone and worked great for sound. It's actually what made me try the style i have on the AK. I didn't use the same on the AK as i didn't want to add any over all length to the rifle.
here is a photo of basicly the design i had on the 6.5cm

[nathantc]

i'm assuming you are putting this on a HK91 or similar clone?
i had something like that way way back around 2005. Never really fell in love with it. Wish i would have kept it as they have gotten retarded in price since then