Posted this awhile back, but don't think I expressed my question correctly. I have a Savage 12 Target rifle that I replaced the complete trigger assembly with a Jard trigger assembly. After removing the trigger assembly, I had a small steel ball on the table with the original trigger assy. Is there a small steel ball that is used as a detent ball on the three position safety ? I checked the "blast shield" on the bolt, and it is NOT from there. Looked on Multichannel arms under Savage 12 parts, and it lists a "1/8" steel ball" for sale, but gives no other description than that.. Any clues as to where it came from would be a big help.....Thanks, rsbhunter