I have a 338 Elite Precision with 1.25 Vortex precision rings and a Razor Gen II. After zeroing at 100 yards, I only have 13 of the 27.5 Mils of adjustment. Typically with 20 MOA base, zero should be near the bottom of adjustment, not the middle.
Rings are zero cant, confirmed the factory base is the correct 20MOA, scope is known good. I took it off my 6.5 Creedmoor that shot out to 1300 yards. Rifle only has 30 rounds fired.

On another forum, I found someone with same rifle, scope and rings with the same issue. he replaced the barel and gained about 9 mils of elevation.
Just curious whether anyone else has had a similar issue with the 338 Elite barrel?

Thanks, Mark