New owner of an accustock. My action and stock are showing fretting(rub marks, aluminum dust) at the rear action screw and along the sides, front to back. Nothing at the front action screw. The gun has only been fired 25 shots. Is this normal? Hows your action rubbing?

I made the assumption it was pivoting off the recoil lug, its not. It's floating off the edge pressure, running parallel with the action.

I'm tempted to bed the front half. I believe it needs more surface area to clamp on and hold still.

Let me know what you have seen. This could easily pertain to all the alloy chassis guys.