what barell will fit on my savage 25-06

[macon]

im wondering what caliber changes can i do

[possum1]

Which ones do you want ;D

[358Hammer]

Staying with the same bolt head 22-250, 6mm Rem, 30-06, 35 Whelan, 400 Whelan. Change bolt head and sky is the limit.

Neal

[dcloco]

Anything that uses same bolthead.....or you can change your bolthead as well.

22/250
243
7/08
6mm
308
270
30/06
...and...and..

[Blue Avenger]

280
250 savage
300 savage
7x57
any of the BRs
257 roberts
220 swift
225 win
5x57
338-06
260
22-243
22-6mm rem
any of the above in ackley form

[JASON_SCHROEDER]

Could I rebarrel a 25-06 in 257 Weatherby? New bolt head and magazine?

[358Hammer]

Yes and you could probably rechamber that 25-06 to the 257 Weatherby.

Neal

[JASON_SCHROEDER]

Sweet! I need a new barrel anyway and now have to decide between 25-06AI or 257 Weatherby Mag. Sorry to hijack this thread.

[Blue Avenger]

AI is cheaper to build and shoot. 257 mags are hard on barrels if you shoot a lot.

[macon]

i was hoping i could put a 300 winmag barell on it or 7mag my gun is a model 12 bvss that was a special order through savage

[Blue Avenger]

you can, and if you had asked to begin with, it would save time guessing whats on your mind.

you will need a different bolt head and mag if you plan on a repeter

[geargrinder]

If it is a stagger feed, the bottom of the action will have to be opened up to fit the magnum mag box.

[parkj5]

ill swap u a 300 mag barrel for your 25-06.it is on 112 bvss at the moment. stainless. 26". 150 round count.

[macon]

i dont know i havent even shot it yet,but if i do change it id like to do a 7mm ultramag or 300 ultramag

[geargrinder]

If you're going to the Ultra's, your best bet is to shoot it single shot.

[macon]

will i need a different bolt head if i want to turn it into a 7mm ultramag

[geargrinder]

You'll need a magnum bolthead, same as a 300win or 7mmMag.

http://www.midwayusa.com/viewproduct...tnumber=378112