Need Help With 110 Elite Bolt

[Vartarg]

First things first....I’m no mechanic by any means....

I bought a bolt lift kit from Grimsted Desh and thought I put it together properly but obviously didn’t.

When I went back to look at the video I saw that my firing pin assembly is different from the two he shows on YouTube.

I want to put it back together as original, but can’t find details through searches or videos.....

Here’s a photo of my stripped parts.....

Thanks for any suggestions you can offer....

[celltech]

The round and notched washer...did you take the firing spring apart at some point? Cause they need to go back between the cocking piece and spring:

https://www.savageshooters.com/conte...Assembly-Parts

[Vartarg]

Yes, I did....******! I think I suspected it, but didn’t really want to go through getting the cocking piece back on the spring again.

Thank you....

Anything you noticed....?

George

[celltech]

It looks complete. Of course when you completely pull the firing pin assembly apart you have to set the spring length and firing pin protrusion. The spring length measurement escapes me but set the pin protrusion to .035-.045"

[Vartarg]

I got it done....and the bolt works...many thanks for your help!!!

[Robinhood]

What is your firing pin protrusion?

[Vartarg]

Looks like about .040”

[Raydee38]

I bought one of those kits for an older Savage but I didn't notice any difference. My new Elite Precision bolt is extremely tight compared to my older bolt and I am wondering if the kit will make a larger difference one this one. I have to take the bolt apart and see what the internals look like.