Has anyone done this? I acquired a pre-66 110 that I am putting back into service. I've worked with the original trigger, and a replacement trigger, for a while now. I'm still not 100% satisfied. Any time I get either trigger under 4 lbs. I begin to worry about slamfires.

What I'm wondering is if anyone has replaced the entire assembly (Sear/bracket/safety/trigger) with something like the Jard system, using their 3-position safety?

Or have you replaced that pre-66 safety with a later model 110, and then used the newer sear and a Timney or another trigger system?

I'm not wanting to go Accutrigger (wouldn't look right at all on this vintage rifle) but I'm not opposed to upgrading to a modern trigger that won't detract from the vintage look of the rifle.

Thanks.