Anyone have any experience with the Savage OME unfired Bbl's listed on NSS's site ?
http://northlandshooterssupply.com/clearance/
Anyone have any experience with the Savage OME unfired Bbl's listed on NSS's site ?
http://northlandshooterssupply.com/clearance/
Yes definitely, I have a couple of their shilens and a criterion and they are lights out accurate.Originally Posted by Shooter0302
Sent from my SM-N975U using Tapatalk
ONCE AGAIN, READ what I asked, I was not aware that Shilen & Crirerion Bbl. were OME" Original Manufacture Equipment " and look at the link
I have had a couple over the years. No problems.
Thank you , were they "shooters" ?
Semper Fi
My mistake, I dont know why I thought you just meant prefits in general
Sent from my SM-N975U using Tapatalk
..
Maybe it was the OME that threw me. You must have meant OEM?? WOW
Sent from my SM-N975U using Tapatalk
Both were 243's. Still have one of them and it shoots Hornady 58gr Superformance, and 95gr Federal Fusion factory really well.Thank you , were they "shooters" ?
My .. wasn't meant to you. I don't know how to delete so I used the ".."
His response, "ONCE AGAIN, READ what I asked, I was not aware that Shilen & Crirerion Bbl. were OME" Original Manufacture Equipment and look at the link", to your attempt to help was freaking rude.
I followed Robinhood’s post not sure what else I can say.
Ted. If you deleted some messages guys could pm you.
The Dunning-Kruger effect is alive and well.
I caught the "rude" on this post and another post it was directed at me and some others.
It's got to be the result of Covid cause this guy has been around a while. And we all are better than this.
When a question is asked there is no need to "jump" on anyone
when you don't get the answer you want. We are here to help each other not "knit-pick" or criticize.
If someone misinterprets a question or the question wasn't written plain enough things often get misconstrued. None of us are perfect and we shouldn't expect anyone else to be.
What do you mean delete messages.. is my box full or something.. i use tapatalk so not real sure how to do some things.
Sent from my SM-N975U using Tapatalk
I think i got my pm messages deleted now if thats what you meant:)
Sent from my SM-N975U using Tapatalk
I went to my pm and deleted a bunch, thank for the advice.. i had NO idea I had so many lol
Sent from my SM-N975U using Tapatalk
Second that. I have had good experiences both with Shaw and James.Before buying a Savage "OEM", and looking to save a few coins, I'd look
at E.R.Shaw first. Nothing wrong with dealing With NSS. Jim's good people.
No idea where he gets these.
It's fairly common for smiths to sell "new take-offs" (not Savage so much) from customers that buy a factory rifle for the components to be used with a new barrel for a custom build.
But Jim doesn't do gunsmithing- so I have no clue as to where these come from.
That aside because it really doesn't matter- as said, you roll the dice on any mass-production barrel. You may get a tack driver- or not.
Bottom line, if you don't want to roll the dice on maximum accuracy spend the coin that's required. For many, minute of angle is fine, and don't need to spend four or five bills to cut that in half.
I got to thinking about this a bit more......If anyone has purchased a Savage off the shelf,
"We All" have experience with these "OEM" barrels. Jim does not stock OEM barrels as one
might think, He does however have "PULLED" barrel's that he sells off......It's the way it is worded.
Keeping my bad Karma intact since 1952
I wonder if he laps them or anything. Does anyone know if he does?
Sent from my SM-N975U using Tapatalk
Confucius or one of those wise people said the only fool is the 1 that doesn't know there a fool and other words we're all fools lol
Sent from my SM-N975U using Tapatalk
Sorry just an attempt to lighten the mood :)
Sent from my SM-N975U using Tapatalk
^^^Like^^^
Posting Permissions
Reply With Quote
Bookmarks