Went to a match and couldn't get my Savage 10 FCP to fire consistently. Sometimes when i pull the trigger its not firing its going to safe. Run the bolt again and sometimes still no fire and some times it fire.
The blade is not locking up as some ive seen on Youtube. I cant replicate dry firing at home, whats up??
TIA, Kevin
Need some clarity. What do mean it’s going to safe at time? Does the sear trip every time you are firing?
Try turning the pull weight of the accutrigger back up a little bit maybe... If the trigger is turned down all the way, sometimes it locks up the trigger and won't fire.Originally Posted by Kev1Doggy
Just my .02
The firing pin is dropping not hitting the primer, has a different sound to it!
I am guessing that you either have to clean the trigger or adjust the spring a bit.... maybe both.
Check your trigger mechanics. If you pull the trigger kinda sideways you can drop the sear without the safety blade being clear first. Make sure you are pulling straight back...
Is it the original stock that is on the rifle or have you put an aftermarket stock on?
Just put in a ESS MDT chassis. Was in a Choate tactical. would do it occasionally in it.
i have it out of the stock, not rubbing on anything. I cant replicate what it was doing at the range, seems like there is a lot of sideplay between the trigger and the safety blade.
Posting Permissions
Reply With Quote
Bookmarks