I use a pair of magnetic bubble levels to help mount my rifle scopes. One level sits on a flat surface on the rifle, the other on the flat top of the scope. What I realized yesterday is that my Axis has no flat surface, so it makes it difficult to get a secure level. What have others done with this issue?
Sent from my SM-G955U using Tapatalk
Although it's not perfect, I used my wheeler bubble levels the one that is totally flat (usually the one that goes on top of the elevation turret) I tried to find the flattest surface around the safety. I have a Boyd's prairie hunter on my axis, and there is just enough area there to lay the bubble level across it. It's not exactly perfect, but it is closer than I could get it before. Then I plum the scope to the plumb line. I don't use the bubble level on top of the turret.
I have a pretty fool proof way of leveling scopes.. take a straight edge, very rigid one, place edge flat on rail and move scope till it is flat on other edge. This will work with most scopes.
Sent from my SM-N975U using Tapatalk
https://www.realavid.com/product/level-right-pro/
Look in to it.
That would definitely be a nice little rig to own.Originally Posted by 8mm RUM
Sent from my SM-N975U using Tapatalk
I install the mounts on the rails, remove caps from rings level the gun in a home made holder. using the scope 1/2 rings as a level point. Install a scope level on the barrel. Install scope in rings using top turret. level the scope with the level that I installed on the barrel. Then I go to the range zero the scope to 100 yards. Fire 3 rounds at a dot at the bottom of the target. then dial 10 MOA up and again fire at the dot using a 24 inch level check to see if its tracking level. This is more confusing to write than to do.
Makes sense, if its canted at all your windage position would change
Sent from my SM-N975U using Tapatalk
I like Talley mounts and use them as a rifle leveling point. Then I use a string hung from a door opening across the house and level the scope with the reticle.
Believe it or not aeroprecisions mounts are really awesome you don't get any scope role as you tighten them
Sent from my SM-N975U using Tapatalk
A great place to start. Bagged in with a square level on the butt-stock pad screws and a plumb bob at range to get the vertical line true to finish.
The Dunning-Kruger effect is alive and well.
I watched a video where a guy used a plumb Bob at home and using a very bright light, shined in objective lense projecting the cross hairs on the wall.. of course rifle is also level but i though about trying it one day
A great place to start. Bagged in with a square level on the butt-stock pad screws and a plumb bob at range to get the vertical line true to finish.
Sent from my SM-N975U using Tapatalk
Another seat taken on the bandwagon. lol
Lol yep:) have you seen that method? I'm guessing you have:)
Sent from my SM-N975U using Tapatalk
A one piece Weaver style scope mounting base gives you a flat for your magnetic level, depending on your scope/ring
height. If that does not work, you are SOL!
What i don't care for , you typically have what about a 1/8th inch on both sides between the lines and the bubble.. not the most precise for long distances I wouldn't think.. i have some larger levels that are more precise but would like to have a couple really small ones that I know are as well.
Sent from my SM-N975U using Tapatalk
It comes down to the shooting, and how you go about doing it.
A bipod sitting on a solid surface like a bench is one thing, but resting on the ground could be another thing.
Ok so lets say your shot at 600 yds is off by 6”, how can you be sure it wasent caused by wind?
Or a combination of wind and shooter error?
And what does it matter anyway why it was off? Fact is it was off.
If you want to be more precise, find a more precise way to shoot.
I understand that and agree, I just dont want to even have to wonder if its a 3rd possibility. It can be difficult to judge if it was me already so the more possibilities I elimimate the easier it makes it to know it was my bad wind call.
Sent from my SM-N975U using Tapatalk
Posting Permissions
Reply With Quote
Bookmarks