Part fell off my Striker, I can’t figure out where from

[Mrvmax]

I was swapping barrels on my Striker and this “circlip” fell onto the floor. Anyone know where it goes? I can’t figure it out.


https://www.flickr.com/gp/moderndefe...uresllc/cY1063

[Armouredtrooper]

It also looks deformed and will need to be replaced once you find out where it goes.

[celltech]

Shaft restraint in the trigger group?

[Robinhood]

Retaining pin for trigger or trigger linkage?

[Mrvmax]

Thanks for the replies, I’ll check those things. I’ve scoured through the parts diagram at Numrich and the installation instructions for Rifle Basix triggers and I see nothing similar. FYI it is not bent, it’s an odd looking circlip.

[Nor Cal Mikie]

It IS deformed!! It's a clip probably from the trigger or linkage. It's called a "C" clip for a reason but doesn't look like a "C" now.

[Mrvmax]

Here it is next to the safety retaining ring so you can see the size: https://www.flickr.com/gp/moderndefe...uresllc/60NJsT

[Mrvmax]

I looked over it closely and couldn’t figure out where it came from. I swapped barrels/bolts from 17 Fireball to 7mm-08. I took it to the range yesterday and fired 55 rounds through it with no issues. Nothing has fallen apart yet so I’ll see what happens.