Reload Results

[Bad Bob]

Took the Axis to the range this morning, Reloads: Winchester brass, CCI primers, 42.5 gr. Varget, 150 gr. Hornaday SST Bullets. Cartridge O.A.L. 2.735". 100 Yard Target (5 shot group). See pic..

[Jester560]

Have you tried to adjust seating depth to tighten it up some?

Sent from my SM-G986U using Tapatalk

[Bad Bob]

Have you tried to adjust seating depth to tighten it up some?

Sent from my SM-G986U using Tapatalk

Why??

[Jester560]

Why??

If you are happy with it as is, there is no reason to.

Sent from my SM-G986U using Tapatalk

[charlie b]

Your target looks great, especially for a 1st load. I'd hunt with that any day.

I would hope you are not put off by some comments.

Some of us are a bit obsessed with how small our groups can become. It is a personality issue that needs to be professionally resolved, although we are reluctant to consult a licensed practitioner. So, we deal with our mania by buying different powders, primers, bullets and cases. Then specially made tooling to measure and reload the cartridges. Then we spend months (if not years) of reloading and shooting, tweaking each of the many parameters to try to see small improvements.

Then if we have not been able to print a 10 round, one hole group, we either cry ourselves to sleep at night or we go out and buy another barrel/rifle to try to appease out inner demons. :)

[Bad Bob]

The way I see it, I bought the Axis for a "Beater" and my grandkids who are known to leave their equipment at home when headed to my ranch during hunting season
The load I developed is a couple grains under maximum, easy on the recoil, and plenty accurate enough for shots under 200 yards.
I have no obsession with hitting a paper target at 1000 yards or shooting 10 shot, one ragged hole groups.
To each his own!

[Robinhood]

Your target looks great, especially for a 1st load. I'd hunt with that any day.

I would hope you are not put off by some comments.

Some of us are a bit obsessed with how small our groups can become. It is a personality issue that needs to be professionally resolved, although we are reluctant to consult a licensed practitioner. So, we deal with our mania by buying different powders, primers, bullets and cases. Then specially made tooling to measure and reload the cartridges. Then we spend months (if not years) of reloading and shooting, tweaking each of the many parameters to try to see small improvements.

Then if we have not been able to print a 10 round, one hole group, we either cry ourselves to sleep at night or we go out and buy another barrel/rifle to try to appease out inner demons. :)

That is a little bit harsh IMHO, While we can agree that a hunting rifle and a plinker should have different expectations than a target rifle, when someone post a 1 inch group with the recipe It isn't outlandish for someone to offer advice. We all know what a rabbit hole accuracy can be. We also know that savages can shoot very well. No matter, Some are looking for help and some are not. I will leave it to the op to establish that up front. So don't be so hard on yourself and I!!!!

Bad Bob, Good job and get those kids out shooting. We need to hook up sometime bob. Im only an hour away.

[Jester560]

I wasn't putting your group down. It is a good group and if you are happy, good! Sorry if I offended you!!

Sent from my SM-G986U using Tapatalk