Rear bag height

[azguy]

I have changed my Axis 223 from a Boyds stock to a Oryx Chassis. I like much of the features f the Oryx including magazine and fit. Problem I am having is rear bag fit while shooting prone. On the Boyds moving the back or forward to adjust height and using the ears for fine adjustment worked. On the Oryx I only have one height. Give me some advise?

[Stumpkiller]

Turn the bag around.

[SageRat Shooter]

I see a lot of PRS guys using this bag...

https://www.brownells.com/shooting-a...rod126578.aspx

Just a suggestion

[Fuj']

You could get a taller AR bag and ride the forward rail below the
cheek rest. I see several people doing this at the range.
I was just on the Protektor site looking for some options for the
new build, and noticed the taller AR bags. If your somewhat handy,
you could attach a longer rail between the grip and butt. It's what
I did on my MDT HS3

[ratamahatta]

Make your own on the cheap. Walmart sells those Polly pellets in the sewing section.

https://youtu.be/lXPv1huIwmA

[azguy]

Thanks guys I like the tip my bag idea. I think that I'm going to replace my bipod with a Harris BRMS with 1 inch notches to get close. I also filled my bag as full as I could get it to maybe give me more vertical control. I'll let you know.
I like using the bags ears to get that last little bit.

[charlie b]

I made my own. Had a bunch of airsoft bb's laying around. Double zip lock bags to keep them from 'leaking' out. Denim bag of appropriate size from Hobby Lobby (no 'ears'). I eventually sewed the open end for convenience. 'Punch' it in place for initial 'set'. Then squeeze for final adjustment.