I never fired one round with the factory trigger set up, so I have no idea if it would fire.

After purchasing the Axis, I did the "50 cent" trigger job. Only changed the return spring and installed a set screw to hold the spring in place. Go to site it in, and click. Not even a depression in the primer.

So I ordered and installed the MCARBO pro trigger kit thinking the cheap trigger job was the issue. Get to the range today, and click.

I am no Armorer. I followed the instructions to the letter. But I do not see how replacing the return spring and installing a overtravel screw would keep the firing pin from making contact with the primer.

Please help me learn how this rifle works and where my issue might be.