I just received my Savage 110 Scout in .223 in the mail, it came from Cabelas which would not normally be my first choice but these rifles are very hard to find here in Canada. Out of the box the rifle is well finished and the stock is really solid. It is an accustock so has an aluminum insert in it and is well bedded. The barrel is quite thick so it’s a nice rigid rifle. Not wanting to actually use the scout mount I removed it, I plan to use the Iron sights. As for the magazine the rifle came with, I’m a little confused as it’s an Accuracy-Mag versus the Magpul that Savage advertises as coming with the rifle. I think Cabelas must have put the wrong magazine in the box. I contacted them about it but have not heard back yet. The magazine is pretty decent and works well. Shouldering the rifle even with the longest insert it is still too short for me and I’m 5’11”. I don’t really understand why savage gives you all those inserts but not a longer set of screws to use them. For the time being I put a slip on recoil pad onto the stock. The stock itself is very solid and feels very natural to shoulder with a very soft pad. Another thing is the bolt handle pictured on their website is not actually the one that is on the rifle. Its large and easy to grab but I personally like the actual product to be like what’s in the photo.

Onto the range….. At our club we only have a 50 yard outdoor range so that was the extent of my shooting. The ammo I used was what I had on hand, Barnaul .223 steel cased Soft points and some Winchester .223 FMJ in a white box. A friend of mine was on the range shooting pistol so I started at 25 yrds just so see how it shoots. I had not adjusted the sights I left them as installed at the factory at about the mid point of the adjustment range. The magazine loads and inserts very easily, there is a little side to side play with it but I didn’t have any round fail to feed even holding the magazine. Actually shooting it was very pleasant I find the shape of the stock makes it quick to shoulder and find the rear sight. Recoil is practically non existent most likely due to the muzzle brake and weight of the rifle topping 7 lbs with no optics. I let my friend take a few shots and he was equally impressed but the short barrel and muzzle brake is a little obnoxious to stand near as a bystander. I had a few fail to eject with the steel case ammo but none with the brass cases. They would extract fully from the chamber but fail to come out of the action every now and then. Im not really attributing this to anything yet as I have only put 40 rounds through it. As for where the rounds went I was able to keep everything within a 4 inch bullseye standing. Which for me I was satisfied with. After a little while I moved back to 50 yrds and sat down with some sand bags. I am finding the same thing other 110 scout shooter have found and that is the rifle does shoot a little high. I lowered the rear sight down to its lowest setting and used a 6 o’clock hold on the 4” bullseye and again was able to keep all the rounds inside of it and even do just as well standing. I shoot a lot of handgun so often use the 6 o’clock hold so im used to it. Like I said it seems to shoot high but its manageable. I have read posts of how the .308 model is practically unusable with the irons so I was a little afraid of how it would shoot. Both types of ammo appeared to have the same POI. I can only imagine how well this rifle would shoot with a scope mounted. I never commented on the trigger yet but I have other Savages and the trigger on this one is just as good as my other ones.



Edit, this afternoon I found some Robertson screws and put in the appropriate spacer and took a bit off the bottom off the sight to drop it down a little lower to see if that helps.