I’ve read through a lot of old posts and bumped into this question a few times but it wasn’t ever definitively answered. Can you, or can you not, take the trigger off a Precision Target action and put it on a Model 10 without modifications? Most of the answers I’ve found concern just using the springs from a Precision Action and not taking the whole trigger assembly. The Model 10 serial number is G121xxxif it matters.Any help will be much appreciated.
If the model 10 is an Accutriggger..yes.
The Dunning-Kruger effect is alive and well.
The trigger itself is no different, it's the sear and the accublade spring that is different on the 6 oz version.
"As long as there's lead in the air....there's still hope.."
Are these parts available from Savage or anywhere else ??Originally Posted by sharpshooter
Thank you
Have you looked the FAQ section over?
https://www.savageshooters.com/conte...r-Part-Numbers
The Dunning-Kruger effect is alive and well.
No, you cannot buy trigger parts or triggers from Savage, however they'll sell some parts to a gunsmith, including the sear. I've purchased several complete red-blade Target Accutriggers off the classifieds board here. It's a five minute swap out and I've replaced the triggers on most of my Savage guns that I use for target shooting only. I would not put one on a field rifle.
Banning a gun will not solve what is a mental health crisis inflamed by incendiary rhetoric on social and television media. The first amendment in this case is less precious and more likely the causal factor than the second amendment.
Posting Permissions
Reply With Quote
Bookmarks