Reply With QuoteNOT being a CM kool-aid drinker so far I've found three barrel makers that offer pre-fits's, two only offer it in barrels contoured to the Savage varmint profile.
Does anyone know of any barrel maker besides Shilen offering a pre fit barrel chambered for the 6 GT ??
NOT being a CM kool-aid drinker so far I've found three barrel makers that offer pre-fits's, two only offer it in barrels contoured to the Savage varmint profile.
Greg at bugholes.com has a 6gt reamer, w/ a .273nk .120fb
He can do a prefit in bartlein, krieger, Brux, proof, hawk hill....
All cut rifling barrels and run a little over $500
He’s usually a 5 week wait.
I have 3 barrels from him and they are top notch.
Know nothing about them but Preferred Barrel Blanks list a 6gt on their site.
Joe h,
Thanks, couldn't find a list of reamers on "Bugholes.com" site, but they do offer several different contours.
I'll see what Preferred Barrel has to offer tomorrow
20 Vartarg .232nk .050fb 26Nosler SAAMI 204 Ruger .233nk .100fb 6.5-06AI .298nk .105fb 223Rem .253nk .080fb – 6.5WSM .299nk .060fb 223Rem .253nk .025fb 6.5RSAUM .298nk .090fb 223AI .253nk .080fb 264 Win Mag .302nk 0fb 223AI .2515nk .050fb 264Win Mag .297nk .133fb 22-250 .255nk .010fb 6.5x55AI .298nk .085fb 22-250 .255nk .077fb 270Win .314nk 22-250AI .256nk .083fb 7mm-08 .318nk .149fb 224Valkyrie .258nk .050fb 7mm-08 .316nk .030fb 22Creedmoor … … 7mm Rem Mag .316nk .179fb 22Creedmoor .257nk 7mm Rem Mag .114fb 3 degree lead 22BR .254nk .080fb 7RSAUM .322nk 6BR .272nk .120fb 7mm STW .320nk 6BRA .272nk .104fb 7WSM .322nk no fb – no turn 6Dasher .272nk .130fb 7WSM .315nk no fb – turn neck 6Dasher .270nk .104fb 7RUM .319nk .088fb 6Dasher .272nk .000fb 28 Nosler .230fb 6GT .273nk .120fb 28 Nosler .321nk .300fb 6Creedmoor .275nk .190fb 284 Win .317nk .188fb 6Creedmoor .275nk .190fb 280AI .317nk no fb 6Creedmoor .275nk .123fb 308 Win .342nk .110fb 6x47Lapua .273nk .104fb 308 Win .343nk .343nk .170fb 6x47Lapua .274nk .120fb 308 Win Tac .344nk .092fb 243Win .275nk .060fb 308 Win Bisley .343nk .088fb 243Win .275nk .129fb 30-06 spg match .339nk .035fb 243AI .278nk .000fb 30-06 spg .340nk .090fb 243AI .276nk .090fb 300 Win Mag .340nk .180fb 243AI .277nk … 300 Win Mag .340nk .110fb 6mmRem .277nk … 300WSM .344nk .088fb 6SLR .276nk … 300WSM .346nk no fb 6mmComp Match .275nk … 300PRC .342nk .233fb 6XC .273nk .130fb 30 Nosler .343nk .162fb 6XC .273nk .130fb 300Blk .336nk 6mm-06AI .276nk .130fb 300RUM .343nk .088fb 6x284Win .281nk .117fb 300RUM .340nk .238fb 25x47Lapua .289nk .130fb 300Wby .339nk .248fb 25Creedmoor .290nk … 300 Norma mag .344nk .215fb 25-06 .291nk .105fb 338 Norma TAC .370 .225fb 6.5Creedmoor .297nk .199fb 338 Norma Mag AI .371nk .225fb 260Rem .297nk .100fb 338 Lapua CIP 260Rem .298nk .040fb 338 Lapua .372nk .130fb 260AI .298nk .088fb 338 Lapua .375nk 260AI .295nk .060fb 338 Lapua AI 40degree .371nk .275fb 6.5x47L .293nk .150fb 338 Edge .372nk .098fb 6.5x47L .294nk .178fb 338 Win Mag .371nk 6.5x284 .297nk .188fb 35 Whelen .390nk 6.5SAUM .296nk .081fb 6.5PRC .298nk .130fb
Bugholes list of reamers. He needs to put them on his website. he’d probably get more buisness.
he has a Lot more reamers than what I thought he would.
He’s built me a 6x47lapua, 6dasher and 7saum. All of mine are on Bighorn actions...I’ve migrated over to them now. Try out a cut rifled barrel, you’ll like it. Especially in a 6GT, that looks like an accurate case.
Xcaliber lists the 6gt and a sale just began.
Originally Posted by go4shoot
True, but they don't feel the need to forward [e mail] a copy of the 6 GT's reamer, I made it simple, just the neck OD, the throat/free bore ID, and the free bore length the.
Note how "Bughole" lists two of the free.
This is probably pretty standard for most chamberings, except when it comes to the 308.
I'm guessing that since the 6GT is new, everyone offering a prefit will have the same reamer profile ??
If you are going to the trouble of using the 6 GT, Bugholes is the very least you should do. They carry all of the custom barrel makers, most in stock. An email and you will get consise information addressing the questions you ask. Do it. You will not regret it.
The Dunning-Kruger effect is alive and well.
Trouble ? buy brass, use my BR bushing and BR seater dies, and staying with a accurstock pretty well stuck with the Savage Varmint Bbl. profile, or do some "whittling"
You missed the point. Bugholes is your place.
Greg at 239-289-2338 or
southernprecisionrifles@gmail.com
The Dunning-Kruger effect is alive and well.
Posting Permissions
Bookmarks