Working on a Savage 111 LRH chambered in 6.5-284. The rifle shoots good but the bolt is catching and giving a very hard bolt click even on start loads with multiple bullets brass and powders. Bolt functions fine, no heavy bolt lift at all right up until the end and then its a two handed effort to get that last 1% of bolt rotation to get the bolt free. There are no markings on the brass at all and the chamber looks to be fine as well. I have cleaned it very well and removed all carbon and copper and the problem persists. I am wondering if maybe I should polish the bolt baffle and see if that helps. The rifle has around 150 rounds through it now and has done this from the start. I have tried Lapua, Norma and Hornady brass with the Hornady actually working the best so far as the bolt click goes.