As the Axis uses a cut out in the front of the receiver for a stock mounted recoil lug rebarreling is a little different than with the regular 10/110 models.

Option A would be to leave the receiver alone, rebarrel and use the stock mounted lug.

That would be simple and inexpensive but is the mating as secure as a barrel mounted lug?

Is accuracy affected?

Option B involves machining off the front of the receiver so a regular lug can be installed and removing the factory style lug from the stock.

A little more time/labor intensive and an added expense.

Is there a payoff in accuracy?

Other things to consider?