Results 1 to 6 of 6

Thread: 93R Extraction Question

  1. #1
    Basic Member
    Join Date
    Dec 2018
    Location
    NW Indiana
    Age
    60
    Posts
    386

    93R Extraction Question


    Do the 93R models suffer from the same weak extraction issues that plague the Mark II?

  2. #2
    Administrator J.Baker's Avatar
    Join Date
    Dec 2006
    Location
    NW Ohio
    Age
    49
    Posts
    6,407
    Yep - both models use the exact same design.
    "Life' is tough. It's even tougher if you're stupid." ~ John Wayne
    “Under certain circumstances, 
urgent circumstances, desperate circumstances, profanity provides a relief denied even to prayer.” —Mark Twain

  3. #3
    Basic Member
    Join Date
    Dec 2018
    Location
    NW Indiana
    Age
    60
    Posts
    386
    Thanks Jim

  4. #4
    Basic Member
    Join Date
    Sep 2017
    Posts
    32
    Bill-use a new bore brush and do a good cleaning in the breech area, and make sure the openings at 9 & 3 o'clock are clean so the extractor arm can get a good bite.

  5. #5
    Basic Member
    Join Date
    Dec 2018
    Location
    NW Indiana
    Age
    60
    Posts
    386
    Quote Originally Posted by Gary Jordan View Post
    Bill-use a new bore brush and do a good cleaning in the breech area, and make sure the openings at 9 & 3 o'clock are clean so the extractor arm can get a good bite.
    I appreciate the advice. I only asked about the 93R only because my brother was looking at one. He decided on the B series instead. I no longer have the Mark II that had this issue. I tried all of the suggested remedies, including what you have recommended. I really liked that rifle but it just would not reliably extract CCI ammo which was what it preferred. I never found any non CCI ammo that would shoot halfway decent. I moved on to a CZ 457.

  6. #6
    New Member
    Join Date
    Mar 2020
    Posts
    1
    Sorry so late with the reply.. I purchased a Mark II FVSR about a year ago. It came from the factory with the incorrect ejector set. The ejector set is two different parts on the bolt. Mine came with two of the rounded parts instead of one sharp and one rounded. I notified Savage through email with a photo of the issue and they fixed it by sending the correct set for no cost to their credit. Very happy with the service. Just thought I would let it be known to maybe double check them. Good luck!!!

Similar Threads

  1. Mallet Extraction
    By echo5mike in forum Ammunition & Reloading
    Replies: 0
    Last Post: 03-19-2013, 08:02 PM
  2. extraction of 6XC and 260 AI
    By rsbhunter in forum 110-Series Rifles
    Replies: 9
    Last Post: 08-03-2011, 07:22 AM
  3. hard extraction
    By John K in forum 110-Series Rifles
    Replies: 6
    Last Post: 04-17-2011, 01:35 PM
  4. Question about snap cap extraction.
    By HD80 in forum 110-Series Rifles
    Replies: 6
    Last Post: 01-10-2010, 06:35 AM
  5. Help with very difficult extraction
    By rfurman24 in forum 110-Series Rifles
    Replies: 32
    Last Post: 09-22-2009, 08:07 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •