Anybody had a Lumley arms titanium bolt handle and carbon bolt knob installed on there 110? Looking for the good or bad on these? I assume changing the bolt handle is pretty easy to do.
Don’t have one, I use Glades Armory. But bolt handles are pretty much bolt handles. These seem nice. And Ti. is pretty cool. I work with and make things using Titanium. Fun stuff!
Yes, bolt handles are very easy to replace. Remove the bolt assembly, loosen the BAS(screw in the back), swap the bolt and torque the BAS back on. Mind bolt placement when installing new piece.
I've done it with a different handle so it must be easy. Just follow instructions above.
Swapped my bolt for the Lumley last week went for the round should have, and will order the teardrop shape to fit my mitt better. Well made and about half the weight, did hurt when the BAS finally released the snap when through the allen key and resonated my wrist like a tuning fork!!
Any chance of getting a picture of that bolt with the new handle?Originally Posted by Charlie Launcher
Posting Permissions
The sole purpose of this site is to provide an online community for those who wish to interact with other Savage firearm enthusiasts.
The information and opinions expressed within this site are those of its contributors, and in no way should be viewed as the opinions or recommendations of Savage Arms.
This site utilizes affiliate programs to generate revenue and as such purchasing a product reached by clicking on a link on this site may earn us a small commission on that sale.
Reply With Quote
Bookmarks