sounds like a firing pin adjustment is what you need to do -1st measure firing pin protrusion should be .035-.055 if it isn't at least .040 id chuck the firing pin in a drill press or even a hand drill and take a lil off the round STOP part of pin - go slow measure it again -repeat if necessary till you reach .045- I doubt the spring being to weak is the cause but there no way to know for sure until you disassemble bolt & measure firing pin protrusion -I have 4 axis and 7 savages LOVE EM ! ymmv make that 8 Savage , (one was hiding in a corner)
Bookmarks