I drilled a couple of small holes in the aluminum to give the devcon something to lock into.
Make sure the barrel is floating.
I am supposed to get my new barrel next week-finally. I wanted to ask if any one had any tips or suggestions with regard to bedding the action in a stock with the aluminum in it. Just a very light coat of Devcon on the bottom and behind the lug? Never done anything other than a wooden stock. Thanks
I drilled a couple of small holes in the aluminum to give the devcon something to lock into.
Make sure the barrel is floating.
Rough up the aluminum with your rough barrel from your dremel kit.
Bookmarks