Reply With QuoteContact Fred at SSS and I am sure he will give you the information you need. Go to the man who made the trigger.
I have a sss trigger that’s been discontinued and it has started slam firing and firing while on safety. I can’t seem to find the instructions. I built this rifle about 10 years ago and would like to replace the trigger with a drop in. Who makes the best one for a pre accu trigger??
Contact Fred at SSS and I am sure he will give you the information you need. Go to the man who made the trigger.
Originally Posted by blvedere
10-4. Anything else out there that you know of that’s comparable and safe? As far as a drop in trigger cartridge. I’m not new to this it’s just been 8 or so years since I posted on this forum. Also not my first custom rifle rodeo. I’ve had this one for years, 7/08 with a krieger barrel and my son 7, is finally old enough to hunt with it. LOL
Well, if your looking for a trigger in the 1 lb and up range, Rifle Basix makes one and so does Timney. I installed a Rifle Basix on my Axis and was able to adjust it safely down to the 14 oz advertised weight. (It is rated 14 oz to 3 lbs) Others seem to speak highly of the Timney, which I think is rated at 1.5 to 4 lbs. Either one should work well, especially if you want to set them at a higher pull weight rather than the bare minimum advertised.
The Dunning-Kruger effect is alive and well.
I would 2nd timney..
Sent from my SM-N975U using Tapatalk
I have had good luck with the Riflebasix triggers.
Posting Permissions
Bookmarks