Since your 7mm Rem Mag is a long action, stagger feed it should have a 5.0” action screw spacing. A long action, center feed also has 5.0” spacing. Therefore you should be able to put a Savage LA, SF in a Boyd’s LA, CF, blind magazine stock with top bolt release. However, it may require some Dremel work inside the blind magazine stock well to get the SF magazine which is attached to the action to fit. This is because the dimensions of the blind magazine well on a CF stock are usually slightly smaller in my experience. I have put several Savage LA, CF barreled actions in the older LA, SF, BM stocks. But, I never tried to put a LA, SF into a LA, CF stock. Hopefully, someone else will chime in with first-hand knowledge.
Bookmarks