Oryx Chassis 12VLP Fly Over

**pdufrene** · 12-23-2019, 11:15 PM

I replaced the laminated stock on my Savage 12VLP with a new Oryx Chassis. Here's a flyover:

**686 Shooter** · 12-25-2019, 02:40 PM

That looks great. I love my Oryx.

What did you do to the cheek rest adjustment screws if you don't mind me asking? The adjustment of that is my one pet peeve with this chassis.

**pdufrene** · 12-25-2019, 04:35 PM

Originally Posted by 686 Shooter

That looks great. I love my Oryx.

What did you do to the cheek rest adjustment screws if you don't mind me asking? The adjustment of that is my one pet peeve with this chassis.

Replaced them with camera quick adjustment thumb screws.
https://www.google.com/url?sa=t&sour...ngt7ceKoxX8lYM

**686 Shooter** · 12-25-2019, 10:29 PM

Originally Posted by pdufrene

Replaced them with camera quick adjustment thumb screws.
https://www.google.com/url?sa=t&sour...ngt7ceKoxX8lYM

Awesome, thank you. I'm going to order a set of those.

Merry Christmas

**Robinhood** · 12-25-2019, 11:56 PM

pdufreen, Since you have an aftermarket recoil lug, check to see if it is bottoming out in the chassis and holding the action off the bedding block..

**pdufrene** · 12-26-2019, 04:50 PM

Originally Posted by Robinhood

pdufreen, Since you have an aftermarket recoil lug, check to see if it is bottoming out in the chassis and holding the action off the bedding block..

It's a factory recoil lug. There is about 3/32" gap before the recoil lug would bottom out on the chassis. Although it doesn't look like it in the video, There is 100% contact between the chassis and the action itself from the safety to the recoil lug.