Even though I contacted Savage several years ago, and was told nothing was needed...I been looking on youtube and online for a video or pictures of where to put grease or oil on a Savage Bolt for maintenance & preventing ware, but can't find anything . . I did find one article online for bolt actions in general stating to lube the "Rear surface of locking lugs" "cocking cam" and "extractor cam" but there was no picture showing exactly where those locations are so I was hoping maybe somebody on here had a picture or video showing how it's done on a 110 since my knowledge is limited. After cleaning I just been wiping the bolt and chamber down with a silicone gun cloth.