PTG Bottom Metal not fitting into Accustock

[CowboyWubWub]

Has anybody else tried to drop in a PTG bottom metal into a long action Accustock? The profile of the inlet is fine, but when I torque the action screws down, something is impeding the magazine from seating, and I’m not sure what. I think it’s in the front of the mag well, but it’s hard to tell. Will come back with pictures later.

[JeepsAndGuns]

What mag? AICS style?
Not sure if this will help or not, but I had a similar issue with a short action. I had to mod the mags just a little.
https://www.savageshooters.com/showt...o-fit-a-savage

[CowboyWubWub]

That might help. I’m hoping I can do some work on the stock to get it all to work, but I’m willing to sacrifice a mag to test.

[Baller]

I had the same problem and came to the same solution as JeepsAndGuns. I could have shimmed the bottom metal down but, I'm not a fan of adding more parts to the system.