Hey guys, I know there's more than a few videos out there on how to glass bed a rifle, but I'd like some detailed pointers if you don't mind. I've watched cavedweller1959 on you tube show how he glass beds his CZ 527 Varmint.

In my case, it's a Mark ii BTV. Here are some pics I took of the inside of the stock, 1 with the action inside, and one with the action in place.

Mark-II-BTV-WITHOUT-ACTION.jpg https://postimg.cc/dD73PJ0P

Mark II BTV WITH ACTION.jpg https://postimg.cc/7J4WVxsG

Last, with the action in the stock, and no action screws, if I push down on the top of the barrel, ahead of the tang, I get a slight up and down motion. SEE VIDEO: https://gofile.io/?c=JlcTYI

Obviously, when the action screws are tightened, that rocking motion is gone. Is there any benefit to me glass bedding this thing in the first place?

Thanks.