Any sources for a SA push feed WSM bolt head

[223Rem]

My google foo is extremely weak.

ISO a SA magnum push feed bolt face right handed.

Any help would be appreciated.

[loveha]

PT&G from Midway?
Currently converting a 7mm-08 to 300WSM. Bolt head looks great and fits good. You will need to move extractor and ejector over to new head.

[Robinhood]

Make sure to get the 7/16 long bolt head or you will need to modify a component of your firing pin.

[loveha]

For me I just ordered the following...

https://www.midwayusa.com/product/1004714413?pid=861850

https://www.midwayusa.com/product/1005123911?pid=865680

https://www.midwayusa.com/product/1005122611?pid=761587

I only ordered the firing pin because I had a large pin and in my research knew I would need it when going with the PTG. First time doing anything like this, so what do I know.

[Robinhood]

For me I just ordered the following...

https://www.midwayusa.com/product/1004714413?pid=861850

https://www.midwayusa.com/product/1005123911?pid=865680

https://www.midwayusa.com/product/1005122611?pid=761587

I only ordered the firing pin because I had a large pin and in my research knew I would need it when going with the PTG. First time doing anything like this, so what do I know.

Start your own thread maybe. Do you have your go no go gauge? Put it together.

[loveha]

I was just stating what I bought, and know nothing of this specific 7/16" bolt head you were mentioning....

[Robinhood]

My apologies. I misread this

First time doing anything like this, so what do I know.

as a hijack.

If you measure the length of the lugs on your PTG bolt they are 7/16 or .437 long.

[kingdombuilder]

If you go direct to ptg website its cheaper than midway just type it in search