10 fcp-sr

[JoeJoe]

Hi There.....just joined from the KC area.

A few years ago I picked up a Model 10 FCP-SR with 20" bbl. I find myself never using the detachable magazine, and am wondering if anyone makes bottom metal in a hinged floorplate confirguration? I'd also give consideration to a different bottom metal that accepts a flush mount magazine (if such a thing exists).

Any help for starting my search would be greatly appreciated.

Thanks
joe

[J.Baker]

Which style of magazine does your FCP-SR use? The first year they came equipped with bottom metal for AICS-style magazines, then the next year they switched to using standard bottom metal that accepted Savage's magazines as they came out with their own 10-round (actually 9-round) magazine.

If you have the Savage 10rd mag you can just buy a factory 3-5 round magazine for your current bottom metal which will be flush with the bottom of the stock (same mag's they use on the hunting rifles).

Not sure about the AICS bottom metal as IIRC it was made by Accurate Mag. I THINK it uses the same inlet, but I'm not 100% sure as I've never owned one. Plenty of guys on here bought those so I'm sure someone will chime in with a more definitive answer.

[JoeJoe]

It's the version with the Savage magazines........I looked on Brownell's for the flush mount mags, and they were listed as discontinued (though I may have been looking at the wrong item). I'll keep digging int that option, as it will probably be the quickest.

Thanks!

[J.Baker]

What cartridge do you need the mag for?

[JoeJoe]

.308

[J.Baker]

Everywhere I'm checking seems to be out of stock as far as the major retailers go. Best bet is to go right to the source..,

https://store.savagearms.com/categor...alue_+308+WIN.