In regards to the trigger, for some reason I was thinking PRS had a 1.5 minimum limit for production class, but apparently not.
2.3 Bolt Gun - Production Division
The PRS Production Division was created to encourage growth to our shooting community from outside our ranks by allowing shooters the opportunity to compete in PRS events without being disadvantaged due to equipment. In order to accomplish this we have set limits on the original cost of your rifle and the optic. All other equipment that can be mounted to or added to your rifle that doesn’t significantly increase accuracy will be considered accessories and will not be regulated. We want shooters to be able to buy new equipment or pick up a new item off a prize table and be able to use it without the fear of being disqualified from the Production Division.
2.3.1 Production Division combined rifle and optic MSRP as listed on the company’s website shall not exceed $4,000 USD, the rifle shall not exceed $2,000 USD and the optic shall not exceed $2,000 USD.
2.3.2 Rifle: For the purpose of the Production Division, a rifle is defined as the original manufacturers configuration of a complete firearm which will be comprised of at least but not limited to the following: stock with bottom metal or chassis, a complete action, a barrel and a trigger mechanism.
2.3.3 Optics: For the purpose of the Production Division, an optic is defined as a magnified optical system capable of safely engaging targets at various ranges through the use of an internal reticle and or adjustable turrets.
2.3.4 Accessories: For the purpose of the Production Division, the following items are considered accessories and will not be regulated or prohibited from being used on or in conjunction with your production rifle: muzzle brakes, silencers, barricade stops/blocks,custom paint, rings, red dot sights, bags, pads, bipods, rails, zoom levers, data cardholders, bolt knobs, bubble level, etc.
2.3.5 Ammunition: No Restrictions. Any and all types of factory ammunition or hand-loaded ammo is allowed.
2.3.6 Production Division Rifles will not exceed a caliber of .30 or a velocity of 3,200fps. A match DQ will result any rounds over the speed limit of 3,200 fps (+/- 32 fps for environmental factors and equipment discrepancies).
2.3.7 Match Officials may request at any point during a match that a competitor fire their rifle through chronograph. If the bullet exceeds the 3,200 fps speed limit, the shooter will receive an automatic match DQ.
2.3.8 Enforcement: The PRS WILL NOT maintain a list of authorized rifles or optics due to the dynamics of the ever changing cycle of revised models, new products, and upgrades being released by manufactures. Match Directors are responsible for addressing and enforcing the Production Division regulation matters if and when they arise on a case by case basis.
2.3.9 COF: Production Division shooters will shoot the same COF as Open Division.
2.3.10 Production Division Exceptions:
• If your production rifle came standard without a threaded barrel, you may have a qualified gunsmith remove the barrel and thread it so you can run a brake or a silencer, provided no additional work is done to the barrel or action to “Accurize it”.
• If your barrel needs to be replaced, it must be sent back to the original manufacture for a replacement barrel of equal value. Aftermarket pre-fit barrels,or a new barrel from a custom shop are not allowable replacements.
• You may safely tune your original trigger but replacement triggers are not allowed.
• You may glass bed rifles.
Bookmarks