Looking for those who have messed with the Choate Ultimate Varmint/Target Synthetic Stock with the chassis.
Did you find the chassis to be accurate right out of the box or did you have to skim bed or rebuild the pillars? Or mess with it some other way?
They are so ugly that they might just work! I have read the other threads.
Bill
I have 3 savages, and two of them have the ultimate varminter stocks. I really like them. They seem very stiff, and for me, very comfortable. I like the grip, but I could see how it might not fit other peoples hands. I did not have to "do" anything to them.
I have however had them both inletted by CDI for their bottom metal and use AICS style mags. That was the single best upgrade I did to them.
I think they are a great inexpensive alternative to the high end chassis and tactical stocks. And you don't get upset when they are banged around. If you are just getting into long range there is few if any in that price range that will compare. A used H-S Precision goes for about the same if you can find one in untouched condition.
The Dunning-Kruger effect is alive and well.
I'm with Robinhood & Jeepsand guns, I have two, one of a LA Savage and one on a 700 "RemAge" set up . Nothing required other that an inch/Lb. torque driver or some other method of tightening the action screws. Probably not necessary if you plan to leave the Bbl / action in the stock. BUT necessary if you plan to make a "swap Barrel" set up.
Thanks guys! Knew I would get good info. Is the chassis more than just a piece of aluminum angle iron bedded in the stock? If you got over anxious could you tighten it enough to distort? Have any of you felt there was a reason to fill the angle iron with epoxy?
Bill
It is bullet proof.
The Dunning-Kruger effect is alive and well.
If you're unsure about the performance, read this artice and see what this guy is using for a stock...
http://bulletin.accurateshooter.com/2018/10/scottish-shooter-sets-uk-1000-yard-records-with-factory-savage/
FTR in 223, BA LE Tactical in 308, 110 Flatback in CBI 6mmBR Norma, Others
That was pretty impressive.
OK, the search is on for a long action stagger feed. Was going to build a rear trigger hand gun with one of these.... but now want one for a rifle!
Bill
They come up on eBay every so often. I've generally seen them go anywhere from $75 up to $150.
FTR in 223, BA LE Tactical in 308, 110 Flatback in CBI 6mmBR Norma, Others
Posting Permissions
Reply With Quote
Bookmarks