Just ordered an Oregon mountain barrel but has anyone used one,if so please comment. Thanks
Just ordered an Oregon mountain barrel but has anyone used one,if so please comment. Thanks
Oregon Mountain Barrel or Barrel nut?
The barrel nut looks very similar to the PVA unit. They look good but a hex will collapse with a thin wall nut. In my opinion that could impact setting head space. Let us know.
The Dunning-Kruger effect is alive and well.
Should be here Oct ' 11. The Bartlein bbl came friday.......I will let you know
OK but came yesterday.......I had emailed the vendor and expressed those concerns about it collapsing they assured me that would not happen and if it did send it back....?so today I rebarreled one of my model 12 actions that I had laying around with a varmint contour 26 inch 22-250......I took a digital mic and took all measurements od i,d, threads and length and width and flats....put a tight wrench on it tightened it to 80 psi on purpose.......shot it and after 22 shots marked the bbl where it was headspaced loosened it removed the barrel and then reinstalled it NO PROBLEM. Headspace was spot on Fired 12 more rounds and grouped the same.....?I like this bbl nut I am going to order more
How did you do tighten nut to 80psi?
Phil....... stop it.
David, What I meant was as the nut gets tight I was concerned that the barrel would start to turn, closing the headspace dimension. Hopefully I was wrong and as it seems you had now issues. Thanks for your post.
The Dunning-Kruger effect is alive and well.
Bookmarks