Yes that is correctOriginally Posted by Dennis
I would use nosler brass,I have a 300rum and found the nosler to be the best so far,out of Rem,fed,nosler
I understand you use the 300RUM case and neck it up! Is this correct?
Who makes the best brass for this project?
[B][SIZE=3]Dennis[/SIZE][/B]
Yes that is correctOriginally Posted by Dennis
I would use nosler brass,I have a 300rum and found the nosler to be the best so far,out of Rem,fed,nosler
112,223,choate uv,nikon 6-18<br />lrpv,204,hs stock,sightron S3 6-24x50<br />12 target,McGowen 6mmbr,SSS hbr,Sightron S3 8-32<br />Mark II,22lr,thumbhole,Tasco 6-24x40<br />11 youth,243,Simmons 2.5-10x50<br />116fcss 30-06<br />12fv,204,VX-3 4.5-14x50
I know nossler is a good brass, but you use the 300RUM brass for the 338Edge?
[B][SIZE=3]Dennis[/SIZE][/B]
Yes, that's correct it's 300 RUM necked up with no other changes.
Bookmarks