I'm 5'7" and the LOP on the stock is/was 14.5". I got to fiddling with the stock and discovered the removeable spacer between the stock and gummy recoil pad. Of course, the recoil pad was then too wide to fit in the recess and the screw hole areas in the stock stopped the pad from seating fully. I remedied that by trimming the recoil pad screw areas with a hack saw for clearance and had to grind down the portion of the pad that slipped into the hollow stock using my Dremel and sanding drums.. Long story short, I ended up with a length of pull at about 12.5 inches which feels perfect for me and I no longer have to crawl the stock when shooting from the bench. This will work in the interim until installing a Boyd's stock. I'd post pictures but don't have the capability at the moment.