Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3

Thread: speaking of bbl nuts....

  1. #1
    Basic Member
    Join Date
    Jan 2015
    Posts
    93

    speaking of bbl nuts....

    on so my 10 t shoots so well , that i want to thread the muzzle.
    it has a round bbl nut. the last one did not loosen. i used an action wrench
    and a bbl vise to take it apart. i do not see that as reasonable for reassembly
    using a head space gauge while torquing.
    and suggestions ?
    a notched nut ?

  2. #2
    Basic Member
    Join Date
    Jan 2016
    Age
    40
    Posts
    374
    Absolutely! I would replace the barrel nut & recoil lug regardless! Swapping the stamped & cast parts for solid bar stock machined to exacting specs is a no brainer to me. And reassembly & torquing to exacting specs will be easier as well. Kills two birds with one stone.

  3. #3
    Basic Member
    Join Date
    Jan 2015
    Posts
    93
    so i did some browsing. ss or blued...no black to match my rifle.
    who has a match color nut ? slotted flat black recoil lug to match factory thickness ?

Similar Threads

  1. Speaking of triggers...
    By fgw_in_fla in forum 110-Series Bolt-Action Rifles
    Replies: 11
    Last Post: 10-08-2012, 06:13 PM
  2. Speaking of barrels....
    By fgw_in_fla in forum 110-Series Bolt-Action Rifles
    Replies: 7
    Last Post: 08-24-2012, 05:12 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •