can you tell me what i have ?

[mikeinco]

i traded for a used savage 10 308
what i know:
muzzle is aprox 0.83 dia, 24" bbl black
bolt is black with a large/long tactical knob, cylinder. spaced knurling
stock is plastic, but much stronger stiffer than entry level stocks
accutrigger
"k" serial number

thanks

[Dave Hoback]

Kind of a stab in the dark with pics...more to go on Mike.


EDIT: Sorry, never mind. You said LONG tactical bolt handle.

[mikeinco]

sort of.
mine is marked 10
my stock has the layout for 2 sling studs, yes 2(edited)

your pic is too dark to see details..yes it is a black on black rifle
my stock fore arm is wider than the basic plastic stock

[Dave Hoback]

Model 10fcp-sr maybe??

Does it use a mag? Is the barrel standard or fluted & threaded?

[Dave Hoback]

Model 10tr

[mikeinco]

std black/steel bbl no threads/no flutes
two for arm stud holes
center feed STEEL mag
the bolt shown above it correct
emblem on the base of the grip

[Robinhood]

Does it have an H-S Precision stock on it.




10 FP

[Dave Hoback]

I’m stumped Mike?? Have you tried searching the serial number? Or call Savage with the number? Maybe they can tell you?


Yeah, I was thinking that Robin... the FP-HS. But don’t think it has the the Indian logo on the bottom of the pistol grip.

[Dave Hoback]

And the FP-HS has the standard large head bolt knob..but that could have been changed easy enough.

[hamiltonkiler]

It does. I use too have one in 308. 10-T with an Athlon Argos, Wicked accurate with a 168gn smk.


Sent from my iPhone using Tapatalk

[mikeinco]

well i have not had it apart,
but
savage said it did NOT have an accustock
i hate the stupid bolt release hide the take down bolt design

[Dave Hoback]

well i have not had it apart,
but
savage said it did NOT have an accustock
i hate the stupid bolt release hide the take down bolt design

Mike, haven’t you seen the Savage bottom bolt release “Third Hand” trick??

[mikeinco]

no....link ?
( i own a bunch of savages but only recently started working on them)

Mike, haven’t you seen the Savage bottom bolt release “Third Hand” trick??

[Dave Hoback]

http://www.savageshooters.com/conten...3Third-Hand%94

[mikeinco]

so i had it apart this week,i has a near full length alum sub chassis.
i worked up a load with n140/lapua 185's that will stay inside 3" at 600
with a vortex 6-24x scope.

well i have not had it apart,
but
savage said it did NOT have an accustock
i hate the stupid bolt release hide the take down bolt design

[CFJunkie]

The bottom bolt release and the aluminum chassis says it has an Accu-stock.
The normal Savage plastic factory stock doesn't have an aluminum chassis and has a top bolt release.